Aervi™ FAQs

Yes. Aervi™ has been approved by the California Air Resources Board as CARB compliant equipment.

Not all units on the market use a combination of technologies to guarantee superior results.  Aervi™ air sanitizers emit a plasma that sanitizes surfaces and also the ambient air.

Yes, the units do produce ozone but in very low quantities and a combination of technologies is used to make sure that a minimal amount of ozone is emitted.  The amount of ozone produced by a Aervi™ unit is of the same levels as those emitted after a thunderstorm. The Aervi™ is CARB approved for the US.

Every day ozone is breathed in by us all.  The level of ozone produced by the Aervi™ units is well below the recommended limits and in fact is lower than all international safety levels.

We have reports and data from many sources including The UK Public Health Laboratory at Porton Down and users such as the NHS (UK National Health Service).  These are confirmed scientific reports and not marketing literature. We have a program of continuous research in the USA.

No. Aervi™ units are designed to provide 24/7 protection to any area.  It is safe, efficient and optimal to leave the unit switched on.

The Aervi™ unit runs on around 20 watts meaning an annual running cost from $20 a year.

Whilst peroxide fogging is popular and extremely effective in sanitising an area, once it is completed, the bacterial and viral colonisation will immediately start again.  This means that this process must be constantly repeated. It also requires the space to be unoccupied during the treatment, which is not feasible in some environments.

Of course. The technology within Aervi™ units is safe.  Each unit has been designed to be used in an appropriate location and present no risk of harm.

When plugged in, a blue glow can be seen through the lens.  You may also notice a freshness in the air, especially first thing in the morning when hygiene levels are highest.

The blue light you see is visible light and not UV light.  This is not harmful and has been tested with all Aervi™ units.

Aervi™ units are being produced and are in use in care facilities, ambulances, hotels, pubs, shops, offices and exhibition halls all over the country and indeed worldwide.

After purchasing the appropriate unit for the room and installing it as advised, your Aervi™ unit will start working immediately. The plasma will have dispersed throughout the room after 8 hours, however, allowing a few days to get on top of any back contamination is recommended.  The purifying plasma will be continually present, creating a hostile environment for all micro-organisms.

The germicidal UV lamp combined with the titanium oxide catalyst cleaning plates eliminate any harmful micro-organisms and odours drawn into the unit.  On top of this, the lamp also produces a plasma which is pumped out of the unit and circulates around the room sanitising the air and all surfaces.  Part of the process also has an ionizing effect which reduces the amount of airborne dust and debris.

Whilst there are units that are cheaper, they may be cheaper for a reason.  This could be because the technology is not as advanced, the build quality may be inferior and also the units provided may not have the efficacy data to prove that they work.  We have a robust rolling program of continuous research. We know our data is valid and our units will perform exactly as detailed on the specification sheet.